Push before merge

sddc_source/src/libsddc/Interface.h

@@ -0,0 +1,154 @@
+#pragma once
+
+#define FIRMWARE_VER_MAJOR 2
+#define FIRMWARE_VER_MINOR 1
+
+// HF103 commands !!!
+enum FX3Command {
+    // Start GPII engine and stream the data from ADC
+    // WRITE: UINT32
+	STARTFX3 = 0xAA,
+
+    // Stop GPII engine
+    // WRITE: UINT32
+	STOPFX3 = 0xAB,
+
+    // Get the information of device
+    // including model, version
+    // READ: UINT32
+	TESTFX3 = 0xAC,
+
+    // Control GPIOs
+    // WRITE: UINT32
+	GPIOFX3 = 0xAD,
+
+    // Write data to I2c bus
+    // WRITE: DATA
+    // INDEX: reg
+    // VALUE: i2c_addr
+	I2CWFX3 = 0xAE,
+
+    // Read data from I2c bus
+    // READ: DATA
+    // INDEX: reg
+    // VALUE: i2c_addr
+	I2CRFX3 = 0xAF,
+
+    // Reset USB chip and get back to bootloader mode
+    // WRITE: NONE
+	RESETFX3 = 0xB1,
+
+    // Set Argument, packet Index/Vaule contains the data
+    // WRITE: (Additional Data)
+    // INDEX: Argument_index
+    // VALUE: arguement value
+	SETARGFX3 = 0xB6,
+
+    // Start ADC with the specific frequency
+    // Optional, if ADC is running with crystal, this is not needed.
+    // WRITE: UINT32 -> adc frequency
+	STARTADC = 0xB2,
+
+    // R82XX family Tuner functions
+    // Initialize R82XX tuner
+    // WRITE: NONE
+	TUNERINIT = 0xB4,
+
+    // Tune to a sepcific frequency 
+    // WRITE: UINT64
+	TUNERTUNE = 0xB5,
+
+    // Stop Tuner
+    // WRITE: NONE
+	TUNERSTDBY = 0xB8,
+
+    // Read Debug string if any
+    // READ:
+    READINFODEBUG = 0xBA,
+};
+
+#define OUTXIO0 (1U << 0) 	// ATT_LE
+#define OUTXIO1 (1U << 1) 	// ATT_CLK
+#define OUTXIO2 (1U << 2) 	// ATT_DATA
+#define OUTXIO3 (1U << 3)  	// SEL0
+#define OUTXIO4 (1U << 4) 	// SEL1
+#define OUTXIO5 (1U << 5)  	// SHDWN
+#define OUTXIO6 (1U << 6)  	// DITH
+#define OUTXIO7 (1U << 7)  	// RAND
+
+#define OUTXIO8 (1U << 8) 	// 256
+#define OUTXIO9 (1U << 9) 	// 512
+#define OUTXI10 (1U << 10) 	// 1024
+#define OUTXI11 (1U << 11)  	// 2048
+#define OUTXI12 (1U << 12) 	// 4096
+#define OUTXI13 (1U << 13)  	// 8192
+#define OUTXI14 (1U << 14)  	// 16384
+#define OUTXI15 (1U << 15)  	// 32768
+#define OUTXI16 (1U << 16)
+
+enum GPIOPin {
+    SHDWN = OUTXIO5,
+    DITH = OUTXIO6,
+    RANDO = OUTXIO7,
+    BIAS_HF = OUTXIO8,
+    BIAS_VHF = OUTXIO9,
+    LED_YELLOW = OUTXI10,
+    LED_RED = OUTXI11,
+    LED_BLUE = OUTXI12,
+    ATT_SEL0 = OUTXI13,
+    ATT_SEL1 = OUTXI14,
+
+    // RX888r2
+    VHF_EN = OUTXI15,
+    PGA_EN = OUTXI16,
+};
+
+enum RadioModel {
+    NORADIO = 0x00,
+    BBRF103 = 0x01,
+    HF103 = 0x02,
+    RX888 = 0x03,
+    RX888r2 = 0x04,
+    RX999 = 0x05,
+    RXLUCY = 0x06,
+    RX888r3 = 0x07,
+};
+
+enum ArgumentList {
+    // Set R8xx lna/mixer gain
+    // value: 0-29
+    R82XX_ATTENUATOR = 1,
+
+    // Set R8xx vga gain
+    // value: 0-15
+    R82XX_VGA = 2,
+
+    // Set R8xx sideband
+    // value: 0/1
+    R82XX_SIDEBAND = 3,
+
+    // Set R8xx harmonic
+    // value: 0/1
+    R82XX_HARMONIC = 4,
+
+    // Set DAT-31 Att
+    // Value: 0-63
+    DAT31_ATT = 10,
+
+    // Set AD8340 chip vga
+    // Value: 0-255
+    AD8340_VGA = 11,
+
+    // Preselector
+    // Value: 0-2
+    PRESELECTOR = 12,
+
+    // VHFATT
+    // Value: 0-15
+    VHF_ATTENUATOR = 13,
+};
+
+#define _DEBUG_USB_  
+#define MAXLEN_D_USB (100)
+
+